Assenzizaційна бочка 20 cubic meters

Assenzizaційна бочка 20 cubic meters

The tank is made of 6-8 mm thick St3 sheet. The bottom is made in-house from sheet steel 8 mm thick with a diameter of 2040 and 2100 mm. The back cover on the hinge on the hydraulic cylinder opens 60° upwards, which makes it possible to clean the container in the middle. The disposal tank has the possibility of not much lifting for carrying out technical inspection of the car. The sewage tank has 3 (4'' inch) inlets on valves, for pumping in and pumping out suspensions. On the rear bottom there is a window for the tank filling level indicator. The tank has 4 additional breakwaters inside the barrel for damping of dynamic shocks. The container is additionally reinforced from the outside with stiffening ribs to prevent deformation of the container during the time load. The sanitation tank is equipped with an overflow float valve, an overflow protective tank with viewing window (receiver). As well as positive and negative pressure valves to prevent tank deformation. Also, the sewage tank is equipped with a radial inspection window (level) for observing the filling of the tank. To the complete set also includes Aluminum sides for transporting hoses and other equipment.