Sanitation multilift with a volume of 17 cubic meters

Sanitation multilift with a volume of 17 cubic meters

The tank is made of 6-8 mm thick St3 sheet. The bottom is made in-house from sheet steel 8 mm thick with a diameter of 1840 and 1900 mm. The back cover on the hinge on the hydraulic cylinder opens 60° upwards, which makes it possible to clean the container in the middle. The sewage tank has 3 (4'') inlets on the valve, for pumping in and pumping out suspensions. On the rear hatch there is a window for indicating the level of filling the tank. The tank has 3 additional breakwaters inside the barrel to absorb dynamic shocks. Capacity from the outside additionally reinforced with stiffeners to prevent deformation of the container during loading. The sewage tank is equipped with a protective overflow float valve an overflow tank with an inspection window (receiver). Attack with positive and negative pressure valves to prevent tank deformation. Also, the sewage tank is equipped with a radial viewing window (level) for observation tank filling. The package also includes Aluminum sidewalls for transporting hoses to other equipment. The sewage tank is attached to a 180 mm I-beam. Rollers (rollers) are provided at the back of the tank in its lower part, which simplify the process of movement and loading.